Download dei software

Excel macro to provide the following functions:

- Remote download of the recorded data from the ELOG DATA LOGGER

- Analysis of the recorded data in preconfigured graphs or tables

File allowing you to update the Firmware of your GX1025-1050

To update your device, you have to follow the procedure findable page 61 in the User's Manual.

You can download the Firmware update of the FTV100 through the link below.

Your oscilloscopes
MTX162, MTX112. 

System

• Windows XP/Vista/7. 
• PC with Pentium IV processor or higher, 512 MB RAM, 10 GB HD equipped with a USB port and network output.
  
  Languages
  Version in 5 languages: German, English, Spanish, French and Italian.

The Didascopein@box software is installed automatically when you install Scopein@box LE.

Delivered with the C.A 43, the EMIGRAPH software has been designed to optimize the capabilities of this field meter in terms of acquisition, viewing and display.
Acquisition. For dynamic tests, EMIGRAPH acquires the measurements from the C.A 43 at a rate of one point every 2 seconds. This allows you to record spot measurements and the trace in real time.

Viewing. EMIGRAPH manages the transfer and display of the points (min, max and average) stored by the C.A 43: this means it is possible to search quickly on the screen for random disturbances. Analysis of the details is facilitated by zooming.

Display. For EMC tests in an anechoic chamber or cell, when the C.A 43's display is not visible, Emigraph allows you to present the field meter display on your PC in full-screen mode.

System

• Windows XP/Vista/7/8/8.1/10.
• PC with 1 GHz processor or higher, 512 MB RAM, 4 GB HD equipped with a serial or USB port (with serial adapter).
  Languages Version in 5 languages: English, German, Spanish, French and Italian.  

Bilingual French-English version of the TestLink SE322 software for the C.A 834 sound level meter-recorder.
This software makes it very simple to:

• recover the data from the measuring instrument
• collect the data in real time from the instrument currently connected to the PC  

LabVIEW driver starts with the characters "LV_" whereas LabWindows/CVI driver starts with the characters "CVI_".

Your oscilloscopes

• MTX1052C / MTX1054C,
• MTX1052B / MTX1054B,
• MTX1052 / MTX1054. 
  
  System
• Windows XP/Vista/7/8. 
• PC with Pentium IV processor or higher, 128 MB RAM, 4 GB HD equipped with a USB port and a network output.
  
  Languages
  Version in 5 languages: German, English, Spanish, French and Italian.

Embedded software update procedure

- Download the .bin file from our web site, then press and hold the MEM key and switch the instrument on by pressing the ON/OFF key. The instrument displays BOOT.

- Release the keys and the instrument displays COPY, indicating that it is ready to receive the new software.

- Connect the instrument to your PC using the USB cord provided.

- Copy the .bin file to the instrument as if were a USB key.

- When the copying is done, press the MEM key and the instrument displays LOAD, indicating that the software is being installed.

- When installation is done, the instrument displays PASS or FAIL according to whether or not the operation succeeded. If installation fails, download the software again and repeat the procedure.

- Then the instrument restarts normally.

CAUTION : After the firmware update, you will have to update the Bluetooth module.

Simple Logger II v1.19
For all the SimpleLogger II models

To download the firmware, click on the link below and refer to the "read-me first.txt" file included.

This firmware upgrade is compatible with all previous hardware versions.

The MOT Micro-Ohmmeter Transfer software can be used to control the C.A 6240, C.A 6250, C.A 6255 and C.A 6292 micro-ohmmeters.

Main functions
The Micro-Ohmmeter Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Exporting the measurement data into DataView or into a spreadsheet.

Caution: DataView is not supplied with the MOT software

The CAmReport software is equipped with a very simple user interface for:
> Analysis of the thermograms with the following tools:
    - Cursors (automatic display of the temperature at the point selected).
    - Thermal profile (automatic display of the Min/Max/Avg temperatures on the line).
    - A square or circle for area analysis
    - Polygons and polylines for more accurate analysis of certain areas in the thermogram.

Results tables quickly and automatically display all the information/analysis tools on the thermogram.

> Recovery of voice comments or related measurements 
> Automatic merging of the thermal and real images recorded simultaneously
> Automatic creation of reports for export in .pdf or .docx format.

Configuration required:

Windows 10/ Windows 11 : 
850 MB RAM for 32-bit 
2 G for 64-bit 
NET Framework 4.0 minimum 

System: Windows 10 and Windows 11

Language: Multilingual (15 languages including French, English, German, Spanish, Italian , Dutch, Polish, Romanian, Czech, simplified Chinese, Portuguese, Swedish, Finnish, Turkish, Korean)
  	

Version: v2.2.5 compatible with camera model C.A 1950 & CA1954.

CAmReport crashing after the Windows update

A cumulative update was rolled out on December 13th 2022. This update is responsible for systematically crashing CAmReport during report previews.

This issue was addressed in out-of-band updates released January 31, 2023

Link to Microsoft's procedure and access to corrective updates:

https://support.microsoft.com/en-us/topic/kb5022083-change-in-how-wpf-based-applications-render-xps-documents-a4ae4fa4-bc58-4c37-acdd-5eebc4e34556

EASYWAVE software is designed in order to allow you to:

- retrieve the curves from the oscilloscope mode

- edit the waveforms using drawing tools

- transfer or import toward the ARBitary function (4 memory locations)

- consult from the library of files (sine, square, ramp, pulse, noise, exponential...) 

PEL 105 firmware update.

Instructions :
- Connect the PEL 105 to your computer
- Unzip the downloaded ZIP file 
- Launch FlashUp.exe 
- Load the update files included in the ZIP file ( PEL105.hex , PEL105_1.9.bin , wifi.hex)
- Choose Program Logger and DSP then click on Program

To download the firmware, click on the link below and refer to the "read-me first.txt" file included. This firmware upgrade is compatible with all previous hardware versions.       

The GTT (Ground Tester Transfer) software can be used to control the C.A 6470, C.A 6471 and C.A 6472/74 earth testers.
GTT is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Exporting the measurement data into DataView (*.dvb files) or into an Excel spreadsheet (*.csv or *.xls files).
  Caution: DataView is not supplied with this version of GTT