Download dei software

The DTR Transfer software can be used to control the DTR8510 ratiometer.

The DTR Transfer software is a tool for :

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Exporting the data into Dataview

Caution : DataView is not supplied with the software DTR

GTC is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and saving them (creation of a *.icp file)
- Perform instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb files) or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of GTC

This loader, new version v 1.09 allows you to update the firmware version of your ASYC IV.

Affected models

MTX3292B - MTX3293B -> firmware version  v 1.02

CA5292 - CA5293  -> firmware version  v 1.02

Note!

This Loader also allows you to change the language pack embedded in the multimeter - During installation you will be able to choose a language pack of two of the four possible languages (FR-GB, DE-GB, ES-GB or IT-GB).

We have an Android application available for the PEL102 and PEL103 power and energy loggers.

This application then displays a screen from the remote power and energy logger on your smartphone or tablet.
This allows you to:

- see the measurements in real time,
- configure the instrument

To download the application, click on the link below. 

Megohmmeter Transfer is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and then saving them (creation of a *.icp file)
- Performing instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb) files or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of MEGOHMMETER Transfer 

The SL II Simple Logger II software allows you to control the Simple Logger II Loggers:

CL601, L101, L102, L111, L642, L261, L481, L562, AL834, ML912, ML914, L702, L404, L322, L432.

Simple Logger II software functions:

• Configure the devices,
• Download and display the data in memory,
• Make acquisitions in real time,
• Diplay recorded data on tables and / or graphs,
• Export data measurement to DataView (*.dvb files) or to a spreadsheet (Excel).  

Attention : DataView is not provided with SL II software

CAUTION : The firmware version v2.00 must be installed on the device before this update.

In order to update the Bluetooth module, you have to follow the procedure as below :

- Download and unzip the file BLExxxx.zip and copy BLExxxx.hex into the device.

- Switch on the device and press Bluetooth button.

- Wait for one minute for the PASS/FAIL message. 

- If PASS message appeared, the file BLExxxx.hex will be renamed as BLE_Updated.hex and will have to remain on the device.

- The Bluetooth module is updated.

DataView v3.62.0016

Compatible instruments :

• PEL 102, PEL 103, PEL 104, PEL 105, PEL 106 power and energy loggers;
• F407 and F607 power and harmonics clamps;
• C.A 8220 and 8230 single-phase power analysers;
• Qualistar C.A 8331,8332, 8333,8334, 8335, 8435, 8436, 8336 and 8345 three-phase power analysers;
• C.A 6526, 6532, 6534, 6543, 6547, 6549, 6550 and 6555 megohmmeters;
• C.A 6240, 6250, 6255 and 6292 micro-ohmmeters;
• C.A 6470N, 6471 and 6472 earth testers;
• C.A 6417 earth clamp;
• DTR 8510 ratiometer for transformers;
• Simple Logger II and L452;
• C.A 1110, 1227, 1246, 1821, 1822, 1510,1823, 10101, 10141 physical measurement devices;
• C.A 6116, 6116N and 6117 electrical installation testers

Languages

DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish

TACHOGRAPH software can be used for management of the data contained in the C.A 1727.

It has the following functionalities:

-          retrieval and display of the measurements recorded by the instrument,

-          the counting of the integral and the stemming of a curve (position and acceleration),

-          the filtration of a recording by moving average,

-          the exporting of the different curves acquired into EXCEL.

Systèms : Windows XP, Windows Seven, Windows 8 & Windows 10

Language : 5 languages (French, English, German, Spanish, Italian)

Version : v2.0 compatible with C.A 1727

Designed for Metrix and Chauvin-Arnoux digital oscilloscopes, SX-METRO can be used to:

• acquire, record and process the curves from the oscilloscope;
• import screenshots;
• save or restore configurations ;
• view the curves in real time;
• communicate with the oscilloscope via an RS232 serial link, USB or TCP/IP network;
• transfer the data into Excel or into a text file;
• perform mathematical processing such as FFT of the signal viewed (windowing, enlargement of the result, Y scale of the FFT in Volt or dB, measurements by markers).

Oscilloscopes

- OX5022, OX5042, CA 922, CA 942
- MTX162, MTX1052, MTX1054,
- MTX3252, MTX3352,
- MTX3354,
- OX7042, OX7062, OX7102, OX7104, OX7202, OX7204,
- OX6062, OX6152, OX6202, 
- OX2000, OX5100,
- OX8100, OX8050, OX8040, OX8062, OX8042,
- OX8620, OX8627, OX8020, OX8027, OX8032, OX8022.
- OXI6204
- OX9062, OX9102, OX9104, OX9302 BUS et OX9304 (with firmware version v1.10 or higher)

Languages
Version in 5 languages: English, German, Spanish, French and Italian. 

To download the software SX Metro v6.3, you need to download the .Zip file, extract all the files and then run the Setup.exe file.

With Datalogger software for DL53, you will be able to :

Setup the instruments,

Download and display the trends,

Export data into Excel

Compatible with Windows 7, 8, 8.1 and 10.

Please find the set.csv file for the CA 10141 conductivity meter in case it has been modified or lost.

Be sure not to change the name of the set.csv file so that it is recognized by the device.

Please find the set.csv file for pH and redox potential of the CA 10101 pH meter in case it has been modified or lost.

Make sure that you do not change the names of the pH_set.csv and ORP_set.csv files so that they are recognized by the instrument.

Driver for OX 9062 / OX 9102 / OX 9104 / OX 9302 BUS / OX 9304 oscilloscopes.

PEL 104 & PEL 106 Firmware update.

Instructions :

- Connect the PEL to your computer.

- Unzip the downloaded ZIP file.

- Launch FlashUp.exe and follow the instructions...

- Choose Program Logger only, then Program DSP only, then Program Wifi only.